Installation

THEFT DETERRENT / KEYLESS ENTRY: ENGINE HOOD COURTESY SWITCH: INSTALLATION

1. INSTALL ENGINE HOOD COURTESY SWITCH (HOOD LOCK ASSEMBLY)

(a) Apply MP grease to the sliding areas of the lock.





(b) Connect the hood lock control cable assembly.





(c) Connect the connector.

(d) Install the engine hood courtesy switch (hood lock assembly) with the 2 bolts and hood lock nut.





Torque : 8.0 Nm (82 kgf-cm, 71 in-lbf)

(e) Install a new hood lock nut cap.





2. INSTALL HOOD LOCK CONTROL CABLE COVER Installation

3. INSTALL LOW PITCHED HORN ASSEMBLY Installation

4. INSPECT HOOD SUB-ASSEMBLY Testing and Inspection

5. ADJUST HOOD SUB-ASSEMBLY Installation

6. INSTALL MILLIMETER WAVE RADAR SENSOR ASSEMBLY (w/ Dynamic Radar Cruise Control System) Installation

7. INSTALL FRONT BUMPER ASSEMBLY Installation

8. INSTALL HOOD CENTER CUSHION Installation

9. INSTALL COOL AIR INTAKE DUCT SEAL Installation

10. INSTALL ENGINE ROOM SIDE COVER Installation

11. INSTALL ENGINE ROOM SIDE COVER LH Installation

12. ADJUST MILLIMETER WAVE RADAR SENSOR ASSEMBLY (w/ Dynamic Radar Cruise Control System) Adjustments

13. ADD WASHER FLUID (w/ Headlight Cleaner System) Installation

14. PREPARE VEHICLE FOR FOG LIGHT AIMING ADJUSTMENT Adjustments

15. PREPARE FOR FOG LIGHT AIMING Adjustments

16. INSPECT FOG LIGHT AIMING Adjustments

17. ADJUST FOG LIGHT AIMING Adjustments