Off Position Warning Does Not Operate

OFF POSITION WARNING DOES NOT OPERATE

Diagnosis Procedure


1. CHECK DTC WITH BCM

Check that DTC is not detected with BCM.
Is the inspection result normal?
YES- GO TO 2.
NO- Perform trouble diagnosis relevant to DTC indicated.

2. CHECK DTC WITH COMBINATION METER

Check that DTC is not detected with combination meter.
Is the inspection result normal?
YES- GO TO 3.
NO- Perform trouble diagnosis relevant to DTC indicated.

3. CHECK COMBINATION METER BUZZER

Check combination meter buzzer.
Combination Meter Buzzer.
Is the inspection result normal?
YES- GO TO 4.
NO- Repair or replace the malfunctioning parts.

4. CHECK INTELLIGENT KEY WARNING BUZZER

Check Intelligent Key warning buzzer.
Intelligent Key Warning Buzzer.
Is the inspection result normal?
YES- GO TO 5.
NO- Repair or replace the malfunctioning parts.

5. CHECK DOOR SWITCH

Check door switch (driver side).
Door Switch.
Is the inspection result normal?
YES- GO TO 6.
NO- Repair or replace the malfunctioning parts.

6. REPLACE BCM

- Replace BCM. Service and Repair.
- Confirm the operation after replacement.
Is the result normal?
YES- INSPECTION END
NO- Check intermittent incident. Intermittent Incident.