Combination Meter Buzzer

COMBINATION METER BUZZER

Component Function Check


1. CHECK FUNCTION

1.Select "INTELLIGENT KEY" of "BCM" using CONSULT.
2.Select "INSIDE BUZZER" in "ACTIVE TEST" mode.
3.Touch "Take out", "Knob"or "Key" to check that it works normally.
Is the inspection result normal?
Yes- Warning buzzer into combination meter is OK.
No- .


Diagnosis Procedure


1. CHECK METER BUZZER CIRCUIT

Meter Buzzer Circuit.
Is the inspection result normal?
Yes- GO TO 2.
No- Repair or replace the malfunctioning parts.

2. CHECK INTERMITTENT INCIDENT

Intermittent Incident.
- INSPECTION END