Removal And Installation

REAR SUNSHADE ASSEMBLY


Removal and Installation


REMOVAL

CAUTION:
When removing and installing, use shop cloths to protect parts from damage.
1. Remove trunk lid inner finisher. Removal And Installation.
2. Disconnect rear sunshade control unit connector.
3. Remove rear parcel shelf finisher. Removal And Installation.
4. Remove bolts.
5. Pull rear sunshade assembly toward vehicle front and disengage clips.
6. Pull rear sunshade assembly upward to remove.

INSTALLATION
Note the following item, and then install in the reverse order of removal.

CAUTION:
Be sure to clump the harness to the right place.