Removal And Installation

SIDE AIR BAG (SATELLITE) SENSOR


Removal and Installation


WARNING:
- Before servicing, turn ignition switch OFF, disconnect battery negative terminal and wait 3 minutes or more.
- Never use the air tools or electric tools for servicing.

FRONT DOOR SATELLITE SENSOR

Removal
1. Remove the front door finisher. Front Door Finisher.
2. Remove the front door satellite sensor fixing nut.
3. Disconnect the harness connector, and then remove the front door satellite sensor.

CAUTION:





- Never impact the front door satellite sensor.
- Replace the front door satellite sensor if it has been dropped or sustained an impact.
- Replace the front door satellite sensor of deployed SRS front side air bag module and deployed SRS side curtain air bag module.

Installation
Note the following items, and then install in the reverse order of removal.

CAUTION:
- Never use the old fixing nut after removal, replace with the new nut.
- Never damage the harness while installing.
- If malfunction is detected by the air bag warning lamp, after repair or replacement of the malfunctioning parts, reset the memory using self-diagnosis or CONSULT-III. On Board Diagnosis Function or Scan Tool Testing and Procedures.
- After the work is completed, check that no system malfunction is detected by air bag warning lamp.

SATELLITE SENSOR

Removal
1. Remove the front seat belt retractor. Removal And Installation.
2. Remove the satellite sensor fixing nut.
3. Disconnect the harness connector, and then remove the satellite sensor.

CAUTION:





- Never impact the satellite sensor.
- Replace the satellite sensor if it has been dropped or sustained an impact.
- Replace the satellite sensor of deployed SRS front side air bag module and deployed SRS side curtain air bag module.

Installation
Note the following items, and then install in the reverse order of removal.

CAUTION:
- Never use the old fixing nut after removal, replace with the new nut.
- Never damage the harness while installing.
- If malfunction is detected by the air bag warning lamp, after repair or replacement of the malfunctioning parts, reset the memory using self-diagnosis or CONSULT-III. On Board Diagnosis Function or Scan Tool Testing and Procedures.
- After the work is completed, check that no system malfunction is detected by air bag warning lamp.