DAS

ICC SENSOR


Removal and Installation


REMOVAL
1. Remove engine under cover. Service and Repair.
2. Remove bolts of the left fender protector (front) front side. Exploded View Removal And Installation, "FENDER PROTECTOR :
Removal and Installation".
3. Remove bolts of condenser side seal lower (LH) lower side to obtain space for work. Exploded View Removal and Installation, "Removal and Installation".
4. Disconnect ICC sensor connector.
5. Remove mounting bolts from ICC sensor.
6. Remove ICC sensor.

INSTALLATION
Install in the reverse order of removal.

CAUTION:
Always perform the laser beam aiming adjustment and check the operation after the replacement, removal, and installation of ICC sensor. Description.