Floor Trim

FLOOR TRIM


Removal and Installation


REMOVAL
1. Remove front seat assembly (LH/RH). Refer to Removal and Installation.
2. Remove rear seat cushion assembly. Refer to Removal and Installation.
3. Remove accelerator pedal pad. Refer to Removal and Installation.
4. Remove rear floor grille and foot grille. Refer to Service and Repair.
5. Remove front seat belt floor anchor bolt (LH/RH). Refer to Front Seat Belt.
6. Remove center console. Refer to Instrument Panel.
7. Remove instrument driver lower panel and instrument passenger lower cover. Refer to Instrument Panel.
8. Remove floor hook.
9. Remove dash side finisher, front kicking plate inner, center pillar lower garnish, and rear kicking plate inner, front body side welt (LH/RH), rear body side welt (LH/RH), rear wheel house garnish. Refer to Service and Repair.





10. Remove floor carpet from carpet clips and remove floor carpet.

INSTALLATION
Install in the reverse order of removal.