Diagnosis Procedure

BRAKE WARNING LAMP


Description









BRAKE WARNING LAMP


Diagnosis Procedure

1.CHECK PARKING BRAKE SWITCH
Check that the brake warning lamp in the combination meter turns ON/OFF correctly when operating the parking brake lever (M/T models) or the parking brake pedal (A/T models).
Is the inspection result normal?
YES - GO TO 2.
NO - Check parking brake switch. Refer to Diagnosis Procedure.
2.CHECK SELF-DIAGNOSIS
Perform ABS actuator and electric unit (control unit) self-diagnosis.
Is the inspection result normal?
YES - GO TO 3.
NO - Check items displayed by self-diagnosis.
3.CHECK COMBINATION METER
Check if the indication and operation of combination meter are normal. Refer to Diagnosis System (Meter).
Is the inspection result normal?
YES - Replace ABS actuator and electric unit (control unit).
NO - Repair or replace combination meter.