Diagnosis Procedure

PARKING BRAKE SWITCH


Description

The parking brake switch converts the status of the parking brake lever (M/T models) or the parking brake pedal (A/T models) to an electric signal and transmits it to the ABS actuator and electric unit (control unit).



PARKING BRAKE SWITCH


Diagnosis Procedure

1.CHECK PARKING BRAKE SWITCH
1. Turn ignition switch OFF.
2. Disconnect parking brake switch connector.
3. Check continuity between parking brake switch connector terminal.





Is the inspection result normal?
YES - GO TO 2.
NO - Replace parking brake switch.
2.CHECK COMBINATION METER
Check if the indication and operation of combination meter are normal. Refer to Diagnosis System (Meter).
Is the inspection result normal?
YES - GO TO 3.
NO - Repair or replace combination meter.
3.CHECK DATA MONITOR
On "DATA MONITOR", select "PARK BRAKE SW" and perform the parking brake switch inspection.





Is the inspection result normal?
YES - INSPECTION END
NO - Check unified meter and A/C amp. Refer to Diagnosis System (Unified Meter And A/C Amp.).