Seat Cushion - Second Row, 60 Percent, Bench

Seat Cushion - Second Row, 60 Percent, Bench









Disassembly and Assembly

1. Remove the second row 60 percent seat of the 60/40 bench seat. For additional information, refer to Seat - Second Row, Sport Trac or Seat - Second Row, Explorer, 60/40 Bench Seat - Second Row, 60/40 Bench.

2. Remove the second row 60 percent bench seat backrest. For additional information, refer to Seat Backrest - Second Row, 60 Percent, Bench Seat Backrest - Second Row, 60 Percent, Bench.

3. Remove the inboard upper pivot latch bolt.
- To install, tighten to 40 Nm (30 lb-ft).

4. NOTICE: Use care when separating the cushion trim cover from the hook-and-loop strip, or the hook-and-loop strip can be torn from the cushion foam pad.

Release the J-clips, separate the hook-and-loop fasteners, remove the hog rings and the cushion trim cover.

5. Remove the cushion foam pad.

6. Remove 2 cushion pad supports.

7. To assemble, reverse the disassembly procedure.