Seat Cushion Cover - Second Row, 40 Percent, Bench

Seat Cushion Cover - Second Row, 40 Percent, Bench

Removal and Installation

1. Remove the second row 40 percent seat of the 60/40 bench seat. For additional information, refer to Seat - Second Row, Sport Trac or Seat - Second Row, Explorer, 60/40 Bench Seat - Second Row, 60/40 Bench.

2. NOTICE: Use care when separating the cushion trim cover from the hook-and-loop strip, or the hook-and-loop strip can be torn from the cushion foam pad.

Release the J-clips, separate the hook-and-loop fasteners, remove the hog rings and the cushion trim cover.

3. To install, reverse the removal procedure.