Seat Backrest - Second Row, 40 Percent E-Z Entry

Seat Backrest - Second Row, 40 Percent E-Z Entry

Second Row, 40 Percent E-Z Entry Backrest









Disassembly and Assembly

1. Remove the second row, 40 percent E-Z entry seat from the vehicle. For additional information, refer to Seat - Second Row, 60/40, E-Z Entry Seat - Second Row, 60/40, E-Z Entry.

2. Remove the second row, 40 percent E-Z entry seat backrest. For additional information, refer to Seat Backrest - Second Row, 40 Percent E-Z Entry Seat Backrest - Second Row, 40 Percent E-Z Entry.

3. Using an appropriate tool, push in the hole of each head restraint guide while lifting up and remove the head restraint.





4. NOTICE: Use care when separating the backrest trim cover from the hook-and-loop strip, or the hook-and-loop strip can be torn from the backrest foam pad.

Release the hook-and-loop strips, invert the trim cover as high as it will go.

5. From between the backrest foam pad and the backrest frame, reach up, pinch the ends together and remove the 2 head restraint guides.

6. Remove the backrest trim cover.

7. Separate the backrest foam pad from the backrest frame.

8. To assemble, reverse the disassembly procedure.