Seat - Second Row, 60/40, E-Z Entry

Seat - Second Row, 60/40, E-Z Entry





40 Percent E-Z Entry

NOTE: When installing any seat-to-floor bolts or floor studs, apply threadlock.











60 Percent E-Z Entry

NOTE: When installing any seat-to-floor bolts or floor studs, apply threadlock.











Removal

1. Remove the affected seat retainers and the remove the 40 percent or 60 percent seat.

Installation

60 percent seat

1. Position the 60 percent seat into the vehicle.

2. NOTE: Before installation, make sure the safety belt webbing is not twisted and the safety belts and buckles are accessible to the occupants.

Tighten the retainers in the following sequence.

1. Tighten to 40 Nm (30 lb-ft).

2. Apply threadlock and tighten to 40 Nm (30 lb-ft).

3. Apply threadlock and tighten to 40 Nm (30 lb-ft).

4. Apply threadlock and tighten the remaining 5 bolts in any sequence to 55 Nm (41 lb-ft).





40 percent seat

3. Position the 40 percent seat into the vehicle.

4. NOTE: Before installation, make sure the safety belt webbing is not twisted and the safety belts and buckles are accessible to the occupants.

Tighten the retainers in the following sequence.

1. Tighten to 40 Nm (30 lb-ft).

2. Apply threadlock and tighten to 40 Nm (30 lb-ft).

3. Apply threadlock and tighten to 40 Nm (30 lb-ft).

4. Apply threadlock and tighten the remaining 2 bolts in any sequence to 55 Nm (41 lb-ft).