Intake Manifold - Removal

REMOVAL





1. Disconnect both negative battery cables.
2. Disconnect the Charge Air Cooler (CAC) tube (4) from the EGR air flow control valve.





3. Remove the EGR crossover tube Exhaust Gas Recirculation (EGR) Tube - Removal
4. Disconnect EGR air flow control valve harness connector.
5. Disconnect the EGR valve harness connector.
6. Disconnect the boost pressure sensor harness connector.
7. Remove bolt and nut securing oil dipstick tube.
8. Remove bolts (1) and the intake manifold (2).