Exhaust Gas Recirculation (EGR) Tube - Removal

PICK UP MODELS





1. Disconnect and isolate both negative battery cables at batteries.
2. Remove bolts (1) and the EGR crossover tube cover (2).





3. Loosen and remove two clamps (1 and 3) at ends of EGR Crossover Tube (2).
4. Disconnect the EGR temperature sensor harness connector (4).
5. Remove clamp mounting bolt (5) at center bottom of EGR crossover tube.
6. Remove EGR crossover tube (2).
7. Remove and discard gaskets at each end of tube (2).