Winch Relay - Installation

INSTALLATION






NOTE: Relay #4 shown, all others similar.

1. Slide the relay (1) into the retaining tab (2).





2. Install the control wires (2) and install the nuts (1).
3. Tighten the nuts to 3 Nm (25 in. lbs.).





4. Install the bus straps (4) and connect the cables.
5. Install the nuts (2 AND 3) and tighten to 9.5 Nm (85 in. lbs.).





6. Install the relay pack (1). Winch Relay Pack - Installation