Fog Lamp - Installation

LAMP





1. Reach behind the front fascia to position the front fog lamp and mounting ring unit (1) to the back of the fog lamp seat in the front fascia (2).
2. Align the four slots in the front fog lamp mounting ring with the four latch features (4) integral to the back of the fog lamp seat.
3. Press firmly and evenly on the fog lamp mounting ring until the four latch features snap into place through the mounting ring slots.
4. Reconnect the headlamp and dash wire harness connector to the front fog lamp bulb connector receptacle (3).
5. Reinstall the front belly pan to the underbody. Belly Pan - Installation.
6. Lower the vehicle.
7. Reconnect the battery negative cable.
8. Confirm proper front fog lamp alignment. Adjustments.