Belly Pan - Installation

INSTALLATION






NOTE: Base model shown, SRT models similar.

1. Position the front belly pan (2) to the underside of the vehicle.
2. Install the four push pin fasteners (3) that secure the front belly pan (2) to the underside of the vehicle's lower crossmember.
3. Install the six screws (4) that secure the front belly pan (2) to the underside of the vehicle's front fascia.
4. Install the three screws (1) that secure the front belly pan (2) to the underside of the vehicle's wheelhouse inner. Tighten the screws securely. Repeat for the other side.






NOTE: During installation, ensure rear belly pan is shingled underneath front belly pan. Failure to do so may result in damage to belly pan.

5. Position the rear belly pan (2) to the underside of the vehicle and to the front fascia.
6. Install the fasteners (1) that secure the rear belly pan (2) to the underside of the vehicle. Tighten the fasteners securely.
7. Lower the vehicle.