Headlamp Mounting Crossmember - Removal

REMOVAL





1. Disconnect and isolate the negative battery cable.
2. Remove the front fascia Front Bumper Fascia - Removal.
3. Remove the headlamp units (1).





4. Disconnect the headlamp wire harness from the horns.
5. Remove the bolts that secure the horns to the headlamp mounting crossmember and remove the horns.





6. Mark the location of the hood latch (2) on the front of the headlamp mounting crossmember (1) to aid in reinstallation.
7. Remove the two bolts (3) that secure the hood latch to the headlamp mounting crossmember and position the hood latch and cable out of the way.





8. Remove the bolts (2) the secure the radiator mounting brackets (1) to the headlamp mounting crossmember.






NOTE: Mark the location of the headlamp mounting crossmember to the other body components prior to removal of the crossmember to aid in reinstallation.

9. Mark the location of the headlamp mounting crossmember (1) to the front fenders.
10. Remove the bolts (2 and 3) that secure the headlamp mounting crossmember to the front fenders.
11. Remove the bolts (4) that secure the headlamp mounting crossmember to the front frame rails (5).
12. Remove the headlamp mounting crossmember from the engine compartment.