Engine Cooling Radiator - Installation

INSTALLATION










1. Position the A/C condenser onto the radiator.
2. Slide the radiator/condenser assembly into position and seat the radiator assembly lower rubber isolators in the mount holes.
3. Install the mounting brackets to the upper core support using two torx screws.
4. Install A/C lines to condenser/cooler.
5. Install transmission oil cooler tubes support bracket to radiator (2). Tighten mounting screws to 5 Nm (45 in. lbs.).
6. Position radiator cooling fan assembly on radiator Cooling Fan - Installation.










7. Install upper and lower radiator hoses at radiator.
8. Install the front bumper facia Front Bumper Fascia - Installation.
9. Install front bottom splash shield (if equipped).
10. Install under belly pan (if equipped).
11. Fill cooling system Service and Repair.
12. Charge A/C systemRefrigerant System Charge.
13. Install air box assembly.Air Cleaner Body - Installation.
14. Connect negative battery cable.
15. Install engine cover.