Instrument Panel Cluster Bezel - Removal

REMOVAL





1. Open hood, disconnect and isolate the battery negative cable.
2. Remove the steering opening cover two retaining screws and cover.
3. Remove the knee blocker airbag Knee Blocker Airbag - Removal.
4. Unsnap the left end cover and remove.
5. Remove the two screws to the left lower instrument panel trim plate.
6. Remove the instrument panel center bezel Instrument Panel Center Bezel - Removal.
7. Remove the eight retaining screws to the cluster bezel.




8. Using a trim stick or equivalent, gently pry out on cluster bezel around edges and remove from instrument panel.
9. Disconnect the electrical connector to the instrument panel switch pod (EVIC, NAV, Clock, and Hazard Switch).