Knee Blocker Airbag - Removal

REMOVAL





1. Open hood, disconnect and isolate the battery negative cable.

WARNING: Wait two minutes for the airbag system reserve capacitor to discharge before beginning any airbag system or component service. Failure to do so may result in accidental airbag deployment, personal injury or death.

2. Remove the steering column opening cover (4) two retaining screws and unsnap cover from instrument panel (1).




3. Remove four knee blocker airbag (3) retaining bolts from airbag.
4. Pull down knee blocker airbag (3) and disconnect the one electrical connector (1).
5. Remove knee blocker airbag from vehicle.