Center Pillar Upper Garnish Molding Replacement - Right Side

Center Pillar Upper Garnish Molding Replacement - Right Side

Removal Procedure

1. Remove the front seat belt from the front seat belt height adjuster. Refer to Front Seat Belt Retractor Replacement Front Seat Belt Retractor Replacement.

2. Open the access door and remove the screw, if equipped.





3. Grasp and gently pull the center pillar upper garnish molding in order to release the retaining clips.

4. Remove the center pillar upper pillar garnish molding from the vehicle.

5. Inspect the center pillar upper pillar garnish molding for broken or missing retaining clips.

Installation Procedure





1. Install the center pillar upper pillar garnish molding to the vehicle.

2. Align the retainers to the body and press the center pillar garnish molding in order to engage the retaining.

Caution:
Refer to Fastener Caution Fastener Caution.

3. Install the screw and tighten to 2 Nm (18 lb in).

4. Install the front seat belt to the front seat belt height adjuster. Refer to Front Seat Belt Retractor Replacement Front Seat Belt Retractor Replacement.