Front Seat Belt Retractor Replacement

Front Seat Belt Retractor Replacement

Removal Procedure





1. Using a flat bladed tool, remove the shoulder/seat belt guide adjuster cover (1).





2. Remove the shoulder/seat belt guide retaining bolt from the shoulder belt guide adjuster.

3. Remove the shoulder/seat belt guide from the shoulder belt guide adjuster.

4. Remove the front door upper pillar garnish molding. Refer to Upper Pillar Garnish Molding Replacement Upper Pillar Garnish Molding Replacement.





5. Remove the front door lower pillar garnish molding. Refer to Lower Pillar Garnish Molding Replacement Lower Pillar Garnish Molding Replacement.

6. Disengage the front seat belt retractor guide (4) from the pillar.

7. Remove the shoulder/seat belt retractor bolt (2) from the lower pillar.

8. Remove the shoulder/seat belt retractor (1) assembly from the vehicle.

Installation Procedure





1. Install the shoulder/seat belt retractor assembly to the vehicle.

Caution:
Refer to Fastener Caution Fastener Caution.

2. Install the shoulder/seat belt retractor retaining bolt to the lower pillar and tighten to 52 Nm (38 lb ft).

3. Install the front door lower pillar garnish molding. Refer to Lower Pillar Garnish Molding Replacement Lower Pillar Garnish Molding Replacement.

4. Install the front door upper pillar garnish molding. Refer to Upper Pillar Garnish Molding Replacement Upper Pillar Garnish Molding Replacement.





5. Install the shoulder/seat belt guide to the shoulder belt guide adjuster.

6. Install the upper shoulder/seat belt guide retaining bolt to the vehicle and tighten to 10 Nm (89 lb in).





7. Install the shoulder/seat belt guide to the guide adjuster cover (1).