Cruise Control Module: Service and Repair

REMOVAL PROCEDURE



1. Disconnect the cruise control cable from the following locations:
^ The throttle body cam
^ The throttle body bracket
^ The cruise control module

2. Disconnect the electrical connector from the cruise control module assembly (1).




3. Remove the cross car brace.
4. Remove the cruise control module assembly (3).




5. Remove the fasteners (3) retaining the cruise control module (1) to the mounting bracket (2).
6. Remove the cruise control module from the mounting bracket.

INSTALLATION PROCEDURE



1. Install the cruise control module (1) to the mounting bracket (2).
2. Fastener Notice In Cautions and Notices. Install the fasteners (3) to the cruise control module.

Tighten
Tighten the fasteners to 7.5 N.m (66 lb in).




3. Install the cruise control module assembly (3) on the upper strut plate stud.
4. Install the cross car brace.




5. Connect the electrical connector to the cruise control module assembly (1).
6. Connect the cruise control cable to the following locations:
^ The throttle body cam
^ The throttle body bracket
^ The cruise control module
7. Adjust the cruise control cable. Refer to Cruise Control Cable Adjustment. Service and Repair