Manual Transmission Shift Lever and Selector Lever Cable Replacement

Manual Transmission Shift Lever and Selector Lever Cable Replacement

Removal Procedure

1. Remove battery tray. Refer to Battery Tray Replacement Battery Tray Replacement.





2. Remove shift lever and selector lever cable (2) from transmission control housing (3).

3. Remove shift lever and selector lever cable from shift lever and selector lever cable bracket (1) by pushing back locking rings in counter driving direction.





4. Remove shift lever and selector lever cable (1) from bulkhead.

5. Remove shift lever and selector cable from control lever housing. Refer to Transmission Control Replacement Transmission Control Replacement.

Installation Procedure

1. Install shift lever and selector cable to control lever housing. Refer to Transmission Control Replacement Transmission Control Replacement.

2. Clip shift lever and selector lever cable (3) into transmission control lever housing (1).





Note:
Install the guide with the white marking upwards to the bulkhead. Do not cross the cables.

3. Install shift lever and selector lever cable from inside the vehicle.

4. Install shift lever and selector lever cable (1) to bulkhead.

5. Check for correct fit.





6. Install shift lever and selector lever cable (2) to shift lever and selector lever cable bracket (1).

7. Install shift lever and selector lever cable to transmission control housing (3).

8. Install battery tray. Refer to Battery Tray Replacement Battery Tray Replacement.

9. Adjust shift lever and selector lever cable. Refer to Manual Transmission Shift Lever and Selector Lever Cable Adjustment Manual Transmission Shift Lever and Selector Lever Cable Adjustment.