24 31 010 Replacing Torque Converter Shaft Seal (GA6HP26Z/6HP32Z)

24 31 010 - Replacing torque converter shaft seal (GA6HP26Z/6HP32Z)





Special tools required:






Necessary preliminary tasks:
- Remove automatic transmission 24 00 023 Removing and Installing Automatic Transmission (GA6HP26Z).





Important!
After completion of work, check transmission oil level 00 11 500 Checking/Topping Up Fluid Level In Automatic Transmission (GA6HP26Z/GA6HP32Z).
Use only approved transmission oil.
Failure to comply with this instruction will result in serious damage to the transmission.





Secure transmission with special tool 24 0 200 to assembly stand 00 1 450.
Remove torque converter Service and Repair.





Attach special tool 24 2 353 to drive shaft (1).





Screw in special tool 24 2 351 until it is firmly connected with shaft seal.
Screw in special tool 24 2 352 to remove shaft seal.





Oil sealing lip on shaft seal.
Drive in shaft seal (1) with special tool 24 2 360 as far as it will go.