Replacing Output Flange for Front Axle Output (ATC 300)

27 10 050 - Replacing output flange for front axle output (ATC 300)





Important!
Do not move vehicle with drive power once propeller shaft has been removed.
Replace output flange only in conjunction with a new radial shaft seal.
After completion of work, check transmission fluid level Procedures.
Use only the approved transmission fluid.
Failure to comply with this requirement will result in serious damage to the transfer box!





Operation is identical to Replacing radial shaft seal for front axle output Replacing Radial Shaft Seal for Front Axle Output (ATC 300).