Removing and Installing/Replacing All Seat Belts (Comfort)

72 11 302 - Removing and installing/replacing all seat belts (comfort)





Necessary preliminary tasks:
- Remove trim for parcel shelf 51 46 006 - Removing and installing/replacing trim for rear parcel shelf
- Remove rear seat Rear Seat - Normal





Warning!
Read and comply with safety regulations [1][2]Safety Regulations For Handling Airbag System Components for handling airbag modules and pyrotechnical belt tensioners.
Incorrect handling may trigger the pyrotechnical seatbelt tensioner or side airbag and thereby cause injuries.

Switch off ignition!





Removing left and right seat belts:
Release screw (1) from automatic reel (2) on left and right.
Tightening torques 72 11 20AZ [1][2]Seat Belt Systems.
Remove automatic reels (2) on left and right.
Unscrew bolt (3).
Tightening torque 72 11 20AZ [1][2]Seat Belt Systems.
Remove automatic reel (4).

Installation:
Guide lug of automatic reels (2 & 4) must be seated in body opening.





Release screws (2) on left and right.
Tightening torque 72 11 22AZ [1][2]Seat Belt Systems.
Remove left and right seat belts (1).

Installation:
Secure fittings of seat belts (1) on left and right through stop (3) in guide.





Release screws (1).
Tightening torque 72 11 23AZ [1][2]Seat Belt Systems.
Remove lower strap (2) on left and right.
Remove lower strap (3).

Installation:
Holder for lower strap (3) must be fitted below lower strap on right (2).