Rear Belt Latch Assembly Overview

Rear Belt Latch Assembly Overview






1 Cover

• Not available on all versions.

• Installing => [ Pull the tongue on the cover under the axle for the seat belt latch and swivel it upward. ] Belt Latch

2 Belt latch

• Removing and Installing, refer to => [ Belt Latch ] Belt Latch

• Always replace the seat belt latch if the belt tensioner has deployed with the belt on

3 Nut

• Depending on version

• Check the tightening sequence for the 1/2 left/right backrest, refer to => [ When installing left and right 1/2 backrest, follow threaded connection installation sequence. ] 1/2 Left and Right Backrest Assembly Overview

• 55 Nm

4 Bolt

• Depending on version

• Check the tightening sequence for the 1/2 left/right backrest, refer to => [ When installing left and right 1/2 backrest, follow threaded connection installation sequence. ] 1/2 Left and Right Backrest Assembly Overview

• 55 Nm

5 Backrest center bearing