Belt Latch

Belt Latch

Removing






- Remove the seat bench. Refer to => [ Bench Seat ] Bench Seat.

- Remove the bolt or nut - 2 -.

- Remove seat belt latch - 1 -.

Installation






Install in reverse order of removal. Note the following:

- Make sure the anti-twist mechanism - arrow A - on bottom side of seat belt latch - 1 - is insert in opening - arrow B - on center bearing - 2 -.

- Pull the tongue on the cover under the axle for the seat belt latch and swivel it upward - 1 -.






- If equipped, insert the tongue on the cover into the slit and lock it - 2 -.

For the correct tightening specifications; refer to => [ Rear Belt Latch Assembly Overview ] Rear Belt Latch Assembly Overview.