Power Standard Front Seat Assembly Overview

Power Standard Front Seat Assembly Overview

• The overview is based on the driver seat. The passenger seat is similar and the components are installed reversed from left to right.

• The illustration does not show the floor covering and the four-way lumbar support.






1 Connector Station

• Connector routing => [ Connector Station Connectors ] Connector Station Connectors

2 Cover

• For coupling station

• Removing and installing, refer to => [ Harness Connectors, Disconnecting and Connecting ] Harness Connectors, Disconnecting and Connecting

3 Connector

• With a corrugated tube for the modular wiring routing

• Modular wiring routing, assembly overview => [ Modular Wire Routing Assembly overview ] Modular Wire Routing Assembly Overview

• Modular wiring with corrugated tube on front seat => [ Modular Wire Routing with Ridged Tube on Front Seat ] Modular Wire Routing With Ridged Tube On Front Seat

4 Storage Compartment

• Vehicles with

• Removing and installing, refer to => [ Storage Compartment ] Storage Compartment

5 Spindle Cover

• Quantity: 2

• Clipped to the seat forward/back adjustment spindle

• Removing and installing, refer to => [ Seat Rail Spindle Cover ] Seat Rail Spindle Cover

6 LATCH Child Seat Anchor

• Vehicles with

• for the front passenger seat only

• Removing and installing, refer to => [ LATCH Child Seat Anchor ] LATCH Child Seat Anchor

• Check after accident => [ Child Seat Anchorages, Checking after an Accident ] Child Seat Anchorages, Checking After an Accident

7 Belt Latch

• Removing and installing, refer to => [ Front Belt Latch ] Front Belt Latch

8 Tunnel Side Trim

• Removing and installing, refer to => [ Tunnel Side Trim ] Tunnel Side Trim

9 Power Standard Front Seat

• Removing and installing, refer to => [ Power Standard Front Seat ] Power Standard Front Seat

Optional equipment:

• Seat and backrest heating

10 Headrest

• Power

• Removing and installing, refer to => [ Power Headrests ] Power Headrests

11 Entry Assistance Backrest Release

• Assembly overview, refer to => [ Entry Assistance, Seatback Release Assembly Overview ] Entry Assistance, Seatback Release Assembly Overview

• Removing and installing, refer to => [ Entry Assistance Handle with Bracket ] Entry Assistance Handle With Bracket

12 Button

• With entry assist

• Removing and installing, refer to => [ Entry Assistance Button ] Entry Assistance Button

13 Sill-Side Trim

• Removing and installing, refer to => [ Sill Side Trim ] Sill Side Trim

14 Cover

• Only behind on the seat rail, sill side

• Removing and installing, refer to => [ Seat Rail Cap ] Seat Rail Cap

15 Bolts

• 50 Nm

• Quantity: 4

16 Cover

• For the seat rail

• Quantity: 4

• Removing and installing, refer to => [ Seat Rail Cover ] Seat Rail Cover

17 Actuator

• For backrest and headrest adjustment

• Actuator, removing and installing, refer to => [ Backrest and Headrest Adjustment Actuator ] Backrest and Headrest Adjustment Actuator

• Control head, removing and installing, refer to => [ Seat Adjustment Control Head ] Seat Adjustment Control Head

18 Actuator

• For seat adjustment

• Actuator, removing and installing => [ Seat Adjustment Control Head ] Seat Adjustment Control Head

• Control head, removing and installing, refer to => [ Seat Adjustment Control Head ] Seat Adjustment Control Head

19 Actuator

• For the lumbar support

• Lumbar support adjustment switch, removing and installing, refer to => [ Lumbar Support Adjustment Switch ] Lumbar Support Adjustment Switch

• Four-way lumbar support, removing and installing, refer to => [ Four-Way Lumbar Support ] Four-Way Lumbar Support