Air Injection Pump: Service and Repair

Secondary Air Injection (AIR) Pump Motor (V101)

Removing






• When installing, bring all cable ties back to same positions.

- Remove the front noise insulation - 1 -..

- Disconnect the connectors - 3 - and free them up.






- Press the release buttons and remove the secondary air hoses - 1 -.

- Remove the nuts - 4 - and the AIR pump motor.

• Ignore - 2 and 5 -.

Installing

Install in reverse order, paying attention to the following:

• For the correct tightening specifications, refer to => [ Secondary Air Injection System Overview ] Service and Repair.

- Install the noise insulation..