Oil Level Sensor: Service and Repair

Oil Level Thermal Sensor (G266)

Removing






• Engine oil drained.

- Disconnect the connector - 3 -.

- Remove the nuts - 1 - and the oil level thermal sensor - 4 -.

Installing

Install in reverse order, paying attention to the following:

• For the correct tightening specifications, refer to => [ Upper and Lower Oil Pan Sections, Oil Pump and Oil Cooler Overview ] Upper and Lower Oil Pan Sections, Oil Pump and Oil Cooler Overview.

• Replace the seal - 2 -.

- Fill engine oil and check oil level.