Front Turn Signal Lamp Bulbs

Front Turn Signal Lamp Bulbs

Removal






- Remove headlamp housings. Refer to => [ Headlamp Housing ] Headlamp Housing.

- Turn the bulb socket - 3 - counter-clockwise - arrow A - and remove it from the headlamp housing.

- Turn the bulb - 1 - clockwise - arrow B - and pull it out of the bulb socket - 2 -.

Installation






Install in reverse order of removal. Note the following:

- Insert new bulb in the bulb socket. Do not touch the glass bulbs with bare hands.

• The tab - 2 - on the bulb - 3 - must face up when being installed.

- Insert the bulb socket - 1 - into the headlamp housing - 4 - and turn it clockwise - arrow -.

- Install the headlamp housing. Refer to => [ Headlamp Housing ] Headlamp Housing.