Left and Right B-Pillar Air Guide

Left and Right B-pillar Air Guide

Removal






• The figure shows the left side.

- Remove the upper B-pillar trim.

- Free up the wiring harness - 1, 3 -.

- Remove the Air ionization system control module (J897) from the right air guide. Refer to => [ Air Ionization System Control Module (J897) ] Service and Repair.

- Unscrew the screw - 2, 4, 5 - from the expanding clip.

- Pull out the air guide - 6 - in an upward direction.

Installation

Installation is done in reverse order, observe the following:

- Install the air ionization system control module. Refer to => [ Air Ionization System Control Module (J897) ] Service and Repair.

- Install the upper B-pillar trim.