Seat Cover and Seat Cushion For Rear Seat Bench, Separating and Connecting

Seat Cover and Seat Cushion for Rear Seat Bench, Separating and Connecting

Special tools, testers and auxiliary items required

• Upholstery clip pliers (V.A.G 1634)

Removing






- Remove rear seat bench. Refer to => [ Rear Bench Seat ] Rear Bench Seat.

- Cut the upholstery clips. Refer to => [ Seat Cover with Seat Cushion for Rear Seat Bench ] Seat Cover With Seat Cushion For Rear Seat Bench all the way around the seat frame with piers.

- Remove the seat cover and seat cushion from the seat frame.

- Vehicles with seat heating: free up the seat heating connector

- Pull off seat cover - 1 - from the seat cushion - 3 - as far as possible and cut upholstery clips - 2 - using pliers.

- Remove the seat cover from the opening for the seat belt latch - arrow -.

• The version with a center storage compartment is shown in the illustration.

Installation

Install in reverse order of removal. Note the following:

Information for installation: for example tightening specifications, replacing body parts, refer to => [ Rear Seat Bench Cover and Cushion Assembly Overview ] Rear Seat Bench Cover and Cushion Assembly Overview.