Headrest Cover and Cushion, Height Adjustable

Headrest Cover and Cushion, Height Adjustable

• It is only possible to replace the cover on the height adjustable headrest with a leather cover.

• The height adjustable headrest with a cloth cover and the 4-position headrest cannot be disassembled.

Special tools, testers and auxiliary items required

• Trim removal wedge (3409)

Removing






- Remove the headrest. Refer to => [ Headrest ] Headrest.

- Open the side openings - arrows - on the cover - 1 -.

- Insert the trim removal wedge (3409) or a flat blade screwdriver between the openings - 1 - in - direction of arrow A -.






- Tension the lower U-channel - 3 - in - direction of arrow B -.

- Remove the upper side of the cover with the flat channel - 2 - from the U-channel.

- Open the zipper by inserting the trim removal wedge (3409) or a flat blade screwdriver between the zipper and the cover.






- Tension the lower U-channel - 1 - in - direction of arrow A -.

- Remove the upper side of the cover with the flat channel - 2 - from the U-channel - 1 -.

• The cover must be completely open to remove the upholstery.

- Pull off cover and cushion over the headrest support and remove headrest support.

- Remove cushion - 1 - out of cover - 2 -.






Installation

- Insert cushion - 1 - with proper fit in cover - 2 -.

- Insert headrest support in the cushion with cover.

- Closes the main zipper by moving the upper cover flat channel - 1 - - 2 -.






- Push the edge of the material with the flat channel into the U-channel - 5 -.

- Closing the side locks is similar to the closing the main lock.

- After closing the main zipper and the side zippers with a needle or other pointed object, line up the cover and the profiles.

- Make sure the cover lies on the cushion - 3 - without any wrinkles and without seam markings.

Installation is performed in reverse order of removal, noting the following:

Information for installation: for example tightening specifications, replacing body parts, refer to => [ Headrest Cover and Padding Assembly Overview, Basis ] Headrest Cover and Padding Assembly Overview, Basis.