Left Flange Shaft

Left Flange Shaft

Special tools, testers and auxiliary items required

• Oil Collecting and Extracting Device (V.A.G 1782)

Removing






• Refer to => [ Repair Information ] 02EA Transmission.

• Refer to => [ Clean Working Conditions ] Clean Working Conditions.

- Remove left drive axle.

- Place the (V.A.G 1782) under the transmission.

- Remove left flange shaft countersunk bolt by installing 2 bolts in flange and counter holding flange shaft with assembly lever.

- Remove the flange shaft and the pressure spring.

Installing

Install in reverse order, paying attention to the following:

• Tightening specification, refer to => [ Flange Shaft, Seals and Bracket on Bevel Box Overview ] Description and Operation.

• Replace flange shaft countersunk bolt.

- Press in the flange shaft and secure it with a new bolt.

- Install the drive axle.

- Refer to => [ Transmission Fluid, Checking and Filling ] Transmission Fluid, Checking and Filling.