Steering Gear, Converting From Generation I to Generation III

Steering Gear, Converting from Generation I to Generation III

• There are no longer any Generation I steering gears available as replacement parts.

• Generation II steering gear has been taken out of the replacement part program. A Generation III steering gear must used instead.

• On some vehicles, a few other parts may need to be replaced in addition to the steering gear. The following information explains the vehicles that require this and the procedures. Refer to the Electronic Parts Catalog (ETKA).

The following parts listed must be replaced when replacing a Generation I steering gear with a Generation III steering gear:

• The wiring harness must generally be replaced => [ Electrical Wiring ] Steering Gear Overview, Generation I and II.

Refer to the Electronic Parts Catalog (ETKA).