Convertible Top Compartment Cover and Trim Strip Assembly Overview

Convertible Top Compartment Cover and Trim Strip Assembly Overview

Convertible Top Compartment Cover Trim and Trim Strip





1 Nut

• Tightening specification, refer to => [ Moldings and Trim Assembly Overview ] Description and Operation

2 Decorative Trim Strip

• For the convertible top compartment cover

• Assembly overview, refer to => [ Moldings and Trim Assembly Overview ] Description and Operation

3 Clip

• For the convertible top compartment cover trim

4 Bolt

• 2 Nm

5 Bolt

• 2 Nm

6 Left Trim

• For the anti-roll bar

• Removing and Installing, refer to => [ Rollover Protection Trim ] Rollover Protection Trim

7 Right Trim

• For the anti-roll bar

• Removing and Installing, refer to => [ Rollover Protection Trim ] Rollover Protection Trim

8 Bolt

• 2 Nm

9 Trim

• For the convertible top compartment cover

• Removing and Installing, refer to => [ Convertible Top Compartment Cover Trim ] Convertible Top Compartment Cover Trim

Convertible Top Compartment Cover Inner and Outer Section





1 Stop

• For the convertible top compartment cover inner section

2 Bolt

• 2 Nm

3 Frame

• For the convertible top compartment cover inner section

4 Bolt

• 2 Nm

5 Convertible Top Compartment Cover Outer Section

• Removing and Installing, refer to => [ Convertible Top Compartment Cover Outer Section ] Convertible Top Compartment Cover Outer Section

6 Bolt

• 2 Nm

7 Bracket

• For the antenna module

• Removing and Installing, refer to

8 Convertible Top Compartment Cover Inner Section

• Removing and Installing, refer to => [ Convertible Top Compartment Cover ] Convertible Top Compartment Cover

9 Service cover

• For the antenna module