Convertible Top Compartment Cover Trim

Convertible Top Compartment Cover Trim

Removing





- Remove the trim strip. Refer to => [ Convertible Top Compartment Cover Trim Molding ] Convertible Top Compartment Cover Trim Molding.

- Remove the bolt - 1 -.

- Remove the clip - 4 - from the convertible top compartment cover inner section - 2 - using a 7 mm socket - 3 -.

- Remove the convertible top compartment cover trim - 5 -.

Installation

• Tightening specifications, refer to => [ Convertible Top Compartment Cover and Trim Strip Assembly Overview ] Convertible Top Compartment Cover and Trim Strip Assembly Overview.

Installation is reverse of removal, but note the following:

- The clip must audibly engage when pressed on.

- Install the trim strip. Refer to => [ Convertible Top Compartment Cover Trim Molding ] Convertible Top Compartment Cover Trim Molding.