Left Rear Coolant Pipe on Transmission

Left Rear Coolant Pipe on Transmission

Removing

- Drain the coolant. Refer to => [ Cooling System, Draining and Filling ] Procedures.

- Remove the primary catalytic converter. Refer to => [ Primary Catalytic Converter ] Primary Catalytic Converter.

- Free up the coolant hoses - arrow -.






- Loosen the hose clamp - 2 - and lift clamp - 4 - to remove the coolant hoses.






- Free up the transmission vent hose - arrow -.

- Remove the bolts - 1 - and - 3 -; then remove the left coolant pipe on the back of the transmission and the coolant hoses.

Installing

Install in reverse order of removal. Note the following:

• Tightening specifications, refer to => [ Coolant Pipes Overview ] Coolant Pipes Overview.

• Secure all hose connections with hose clamps appropriate for the model, refer to the Parts Catalog.

- Connect the coolant hose to the coupling. Refer to => [ Connect the Coolant Hose to the Coupling ] Radiator Overview.

- Install primary catalytic converter. Refer to => [ Primary Catalytic Converter ] Primary Catalytic Converter.

- Fill with coolant => [ Filling ] Procedures.