Removal and Replacement

Lubrication System Components

• If large quantities of metal shavings or abraded material are found in the engine oil while servicing the engine, the oil passages must be carefully cleaned to prevent resulting damage and the oil cooler must be replaced.

• The oil level must not exceed the max. marking or the catalytic converter could be damaged!

• Oil spray nozzle and pressure relief valve => [ Oil spray jet and pressure relief valve ] Oil Pan and Oil Pump Component Overview

• Removing and installing Oil Level Thermal Sensor ( G266). Refer to => [ Oil Level Thermal Sensor ] Service and Repair.

For Engine oil capacities and specifications refer to the => Owner's Manual.