Audio Unit Disc Indicator Does Not Work (With Navigation)

Audio System Symptom Troubleshooting - Audio unit disc indicator does not work

Audio unit disc indicator does not work (with navigation)

NOTE:

- Check the vehicle battery condition first Battery Test.
- Check the connectors for poor connections or loose terminals.
- Discs with labels should not be used in the audio-navigation unit. They may jam and damage the player mechanism.

1. Turn the ignition switch to ON (II), or press the engine start/stop button to select the ON mode.

2. Turn on the audio system.

3. Insert a known-good disc or press the EJECT button.

Is the DISC indicator (LED) indicated?

YES -

Intermittent failure, the system is OK at this time. Check for loose or poor connections at the audio-navigation unit and the audio-navigation switch panel.

NO -

Substitute a known-good audio-navigation switch panel Audio-Navigation Switch Panel Removal/Installation, and recheck. If the symptom/indication goes away, replace the original audio-navigation switch panel Audio-Navigation Switch Panel Removal/Installation. If the symptom/indication is still present, replace the audio-navigation unit Audio-Navigation Unit Removal/Installation.