Audio-Navigation Switch Panel Removal/Installation

Audio-Navigation Switch Panel Removal/Installation

With Navigation

NOTE:

- Put on gloves to protect your hands.
- Take care not to scratch the dashboard and related parts.
- Lay a shop towel under the parts when working on them to protect the face panel from scratches or other damage.
- Eject all the discs before removing the audio-navigation unit to prevent damaging the CD/DVD player's load mechanism.
- Discharge static electricity from your body before and during the work.

1. Remove the audio-navigation unit Audio-Navigation Unit Removal/Installation.

2. Remove the interface dial Service and Repair.

Do not touch the terminal connector (A) of the audio-navigation switch panel with your bare hands (if you have touched it, wipe it off thoroughly).





3. Install the audio-navigation switch panel in the reverse order of removal.