Manufacturer Code Charts: 2611

Navigation System DTC Troubleshooting: 2611

DTC 2611: HDD Diag

NOTE:

- Check the vehicle battery condition first.

- Before you troubleshoot, make sure to follow the general troubleshooting information. How to Troubleshoot the Navigation System (With Navigation)

1. Turn the ignition switch to LOCK (0), or press the engine start/stop button to select the OFF mode, then back to ON (II), or the ON mode.

2. Go into the Diagnostic Menu, and select the Self-Diagnosis Mode in the Select Diagnosis items menu. Navigation System Diagnostic Mode (With Navigation)

3. Select the System Links, then select the HDD.

Is HDD OK indicated?
YES - Intermittent failure, the system is OK at this time.

NO - Go to step 4.


4. Check the HDD diagnosis.

Is the Low Temp indicated?
YES - Make sure the dash temperature is normal, and recheck. If the vehicle repeatedly comes back with the DTC, replace the HDD. HDD Removal/Installation (With Navigation) If the symptom is still present, replace the audio-navigation unit. Audio-Navigation Unit Removal/Installation (With Navigation)

NO - Replace the audio-navigation unit. Audio-Navigation Unit Removal/Installation (With Navigation)