Manufacturer Code Charts: 2610

Navigation System DTC Troubleshooting: 2610

DTC 2610: DRAM Diag

NOTE:

- Check the vehicle battery condition first.

- Before you troubleshoot, make sure to follow the general troubleshooting information. How to Troubleshoot the Navigation System (With Navigation)

1. Turn the ignition switch to LOCK (0), or press the engine start/stop button to select the OFF mode, then back to ON (II), or the ON mode.

2. Go into the Diagnostic Menu, and select the Self-Diagnosis Mode in the Select Diagnosis items menu. Navigation System Diagnostic Mode (With Navigation)

3. Select the System Links, then select the Navi ECU.

Is D-RAM OK indicated?
YES - Intermittent failure, the system is OK at this time. If the vehicle repeatedly comes back with the DTC, replace the audio-navigation unit.

NO - Replace the audio-navigation unit. Audio-Navigation Unit Removal/Installation (With Navigation)