Panel, C-Post, Replacing

Panel C-post, replacing

As the illustrations in this service information are used for different model years and / or models, some variation may occur. However, the essential information in the illustrations is always correct.

Removing the C-post panel





Remove:
- the weatherstrip
- the panel
- the seat belt cover
- the end mounting. See End mounting, replacing End Mounting, Replacing.
Pull the seat belt out through the panel.
Remove the panel by pulling it straight into the car.
Press the panel upwards so that the air duct releases.

Installing the C-post panel




Thread the seat belt through the panel.

Install:
- the end mounting. See End mounting, replacing End Mounting, Replacing
- the seat belt cover.
Align the panel with the air duct.
Press the panel into place.
Install the weatherstrip.