Leak Detection, Tracer Agent

Operation number: 87006-2

Leak detection, tracer agent

Note! Some variation in the illustrations may occur, but the essential information is always correct.






Note! The coloring agent may discolor the vehicle paintwork. Therefore extreme caution must be taken when handling the tracing agent.

Note! Carefully follow the manufacturers instructions when handling the UV lamp and the tracing agent.

Note! After filling with the tracing agent, the decal supplied by the manufacturer / supplier must be applied at the point indicated.

Note! When leak tracing, always use the protective goggles supplied with the equipment. The goggles make the color more visible.

Fill the climate control system with fluorescent tracing agent. Refer to: Fluorescent tracing agent, filling Fluorescent Tracing Agent, Filling.





Connect the UV lamp. See the instructions.
Leak trace using the UV lamp.
The fluorescent tracing agent is light green when leak tracing with a UV lamp.

Note! This light green color may be mistaken for leaked or spilled coolant which Volvo uses in its products.

The method for leak tracing using fluorescent tracing agent is the same for both factory filled and aftermarket filled climate control systems.